Soudal 157710 Sanitary sealant Hmx Sanitary Pro Anthracite 300ml

Soudal 157710 Sanitary Sealant Hmx Sanitary Pro Anthracite 300ml

HMX Sanitary PRO is a high-performance, elastic sanitary sealant based on our revolutionary HMX technology. Designed specifically for sanitary applications, the product combines the highest sanitary class XS1 (the highest resistance to mold) with superior adhesion to many substrates used in sanitary areas. Furthermore, HMX Sanitary PRO is easy to apply, more durable, odorless and applicable to natural stone.

Special features

• Excellent workability (no threads, does not collapse, easy cleaning)
• Impervious to mold
• Permanently elastic after curing
• Very good adhesion to many substrates (tiles, bathtubs,etc.)
• Excellent moisture resistance
• Can be used on natural stone
• Excellent paintability
• Odorless
• A more sustainable solution: contains no hazardous raw materials (tin-free, phthalate-free, solvent-free)
• EC-1 Plus label: very low emission

Applications

• Sealing in kitchens
• Sealing in bathrooms

Technical Data

• Base: HMX Polymer
• Consistency: Solid paste
• Curing system: Physical drying
• Skin formation (23°C/50% RH): Approx. 15 min
• Curing speed (23°C/50% RH): Approx. 1 mm/24h
• Density: approx. 1.42 g/ml
• Max. permissible deformation: 25%
• Max. stress (ISO 37): Approx. 0.45 N/mm²
• Modulus of elasticity 100% (ISO 37): Approx. 0.29 N/mm²
• Elongation at break (ISO 37): > 600 %.
• Temperature resistance: -20 °C ? 80 °C
• Processing temperature: 5 °C ? 35 °C

Instructions for use

• Surfaces should be clean, dry and free of dust and grease. Apply the sealant in the joint with a manual, pneumatic or battery operated sealant gun at temperatures between +5°C and +35°C. Spray a little clean water on a spatula and smooth the joint.

For optimal results

• Avoid using too much water when finishing. Use clean water to moisten the spatula (not soap solution) and do not spray directly on the joint
• Smoothing in one pass is sufficient for a smooth and perfect result
• Skin formation begins after 15 minutes. Taking a bath/shower is possible at the earliest 1 hour after application. The sealant reaches its full mechanical properties after 7 days of curing (6 mm joint / 20°C / 50% RH)
• Avoid deterioration of joint sealant until product is fully cured

Safety recommendations

Observe usual work hygiene. Refer to packaging for further information.