Metal Works WD56I Diesel Infrared Heater 16kW

MW-Tools WD56I Diesel Infrared Heater 16kW

Special characteristics

• Suitable for heating rooms from 182 to 928m³, depending on the insulation and ventilation of the room. The better the insulation value of the building elements (lower K-value), the larger the space you can heat.
• Minimum heatable volume of 182m³, with a K-value of 2.5: in case the building is not insulated, with single glazing, full stone walls, roof with old corrugated iron, or for rooms where gates are regularly open.
• Maximum heatable volume of 928m³, with a K-value of 0.5: in case the building is well insulated according to recent building standards
• Suitable for professional and temporary use in areas with sufficient ventilation.
• Easy to move thanks to 4 rotating wheels
• Extensive LCD display with display of: current temperature, thermostat temperature, timer setting and display lock
• Alarm indicators for: misfire, low fuel level, overheating and rollover protection
• Limited construction depth of 305 mm, takes up little space against a wall
• Suitable for room with adequate ventilation.
• Protection against overheating
• 1.5 m long power cable with plug
• 4 freely rotating wheels 65 mm

Advantages

• The infrared heater with a large radiant surface distributes the pleasant warmth evenly to the surrounding room. The large surface of the heater ensures an even and soft heat radiation at the right height for both standing and sitting work
• Low noise. With only 48 decibels, this heater works almost silently
• No air movement. The heat is distributed thanks to the glowing steel tubes, there is no fan and therefore no disturbing wind or noise pollution as with classic hot air blowers
• High quality Korean heater technology ensures complete combustion and the cleanest possible emissions
• Optional flue gas discharge discharges gases and smoke, reduces indoor odor nuisance, and at the same time recovers extra heat from the discharged gases
  Works on both fuel oil and diesel
• Large 50 liter tank, for an extremely high autonomy of 30 hours (3 to 5 working days)
• High quality Danfoss nozzle, widely available in the trade
• Built-in thermostat 0-40°C on the digital control panel
• Compact design. With its limited construction depth of only 300 mm, this heater can be placed compactly against a wall without blocking the passage

Technical data

• Heat emitted kW/h 16
• Heat type Radiant heat
• Energy source Diesel / Petroleum / Fuel oil
• Thermostat Owns the property
• Fuel tank capacity l 50
• Fuel consumption l/h 1.20
• Heatable space m³ 182-928
• Voltage V 230
• Autonomy u 29
• Cable 1.5
• Mobile Yes
• Frequency Hz 50
• Noise level dB(A) 48
• Power consumption kW 0.08
• Weight kg 50.00
• Dimensions (lxwxh) mm 950x305x1,100

Scope of supply

• On Palette
• Supplied without flue gas outlet!