Lievers Voegboy Jointboy Pneumatic Jointing Nailer

Lievers Voegboy Jointboy Pneumatic Jointing Nailer

• Mechanical compacting If a very high value is placed on the grouting of a class VH35 and VH45
• Then mechanical compaction can be applied. This is done to alleviate the working conditions
• A mechanical grout nail is also called a grout boy
• By making the grout with a HST mixer so you get the best grout to start with
• And then to apply the grout manually and then immediately afterwards, when the grout is still moist, to go over it with the grout boy, so that a very high value of grout hardness can be achieved
• This is achieved by optimal compaction of the joint
• The mechanical jointing nail is driven by compressed air
• This ensures a vibrating movement of the jointing sheet
• This should be slid slowly over the joint
• By mounting the correct joint sheet in terms of width and by using the correct method, a good compacting of the joint is achieved

Usage:

• In terms of use, the pneumatic grout nail is no different from the ordinary grout nail, where the mortar is pushed into the joint from the mortar board
• The difference in operation lies in the reduced physical load required during the forceful pressing of the butt and ribbon joints
• Replacing grout blades is easy by loosening two screw connections with the supplied wrench, which clamps the blades to the grout nail

Specifications

• Air consumption: approx. 20 l/min
• Number of vibrations: 6,700/min
• Main dimensions: l x w x h = excluding handle: 12 x 2 x 10
• Variants of jointing nails: 8, 10, 12 standard and 14, 16 optional mm
• Net weight: 750 g excluding air hose
• Material type: various

Includes

• Unpacked
• Without hose and connection

Note: The pneumatic jointing nail must be connected to a compressor, equipped with oil mist, water separator and reducing valve.