Fischer 51291 Thermax 12/110 M12 Spacer Mounting System 20 pcs.

Fischer 51291 Thermax 12/110 M12 Spacer Mounting System 20 pcs.

The Fischer Distance Mounting System Thermax is a solution for fixing into the exterior wall or thermal bridge in the WDVS. The system consists of a special threaded rod made of galvanized steel with a glass fibre reinforced cone, studs and injection sleeves for fixing into perforated brick. In combination with the Fischer High Performance Mortar FIS EM, FIS V, FIS SB and the FIS GREEN, the system is approved for many building materials. The threaded rod with the glass fiber reinforced cone mills itself automatically through the plaster into the insulating material. The threaded rod is anchored in the injection sleeve with an injection mortar into the building material. The cone on the head of the threaded rod interrupts the thermal bridge and takes up the stainless steel stud for the outer fastening. Thermax secures heavy loads such as awnings, surveillance and satellite installations in concrete, aerated concrete and solid and perforated brick masonry.

Benefits

• In combination with the injection mortars FIS EM Plus, FIS V, FIS SB and FIS Green, the spacer system is approved for higher loads in many building materials. This ensures safe and reliable fixing
• Only with a Thermax can lengths from 62 to 170 mm be bridged
• The plastic cone interrupts the thermal bridges between the mounting piece and the internal fastener, thus ensuring an energetically improved fastener
• The glass-fibre reinforced plastic cone milled automatically into the WDVS enables simple, fast and adjustable installation without the use of special tools

Applications

• Concrete, cracked and uncracked
• Perforated brick
• Lightweight concrete hollow block
• Perforated sand-lime brick
• Solid sand-lime brick
• Solid brick
• Cellenbeton

Building materials

• Thermax 12 is suitable for the frontal mounting
• The glass fibre reinforced cone milled automatically through the plaster layer into the insulation material during installation
• The anti-cold cone reliably interrupts the thermal bridge
• In the case of crack-resistant plaster (e.g. thick cement plaster), it is advisable to use the Thermax routing knife supplied when routing
• By sealing the ring gap with the Fischer Multilue and sealant KD, the plaster level of the facade is sealed

Specifications

• Contents : 20 M12 threaded rods, 20 cold-bridge breakers, 20 M12 A4 threaded pins, 20 A4 washers, 20 A4 nuts, 20 sieve shims 20 x 130, 20 bits
• Contents : 20